Vacuum Loading and Material Removal
Vacuum loading of spoil, slurry and wet waste from pits, culverts and site clean-ups — using the truck's high-capacity vacuum to move material where access is tight.
What is vacuum loading and material removal?
Beyond excavation, the truck's vacuum system can load and remove loose and wet material directly from site. With a high-capacity spoil tank and a 2,450 CFM blower, the truck can collect spoil, slurry and other waste that would be awkward to handle with conventional plant.
Service disclosure
[Confirm disposal arrangements and the waste types approved for transport. Vacuum loading is supported by the truck's capabilities; final scope depends on the material, site access and disposal requirements.]
Common applications
- Cleaning out stormwater pits and culverts
- Removing drilling slurry and hydro-excavation spoil
- Site clean-ups of loose or wet material
- Clearing sediment from drainage infrastructure
- Loading spoil from restricted-access excavations
Suitable project types
- Civil construction site maintenance
- Council drainage and pit cleaning programs
- Utility pit and chamber clean-outs
- Post-excavation site reinstatement
The typical work process
- 1
Identify material
Confirm the waste type, volume and any disposal requirements.
- 2
Check access
Confirm the truck can reach the material safely.
- 3
Load
The vacuum loads material directly into the debris tank.
- 4
Remove
[Disposal arrangements to be confirmed — transport to approved facility.]
Safety and planning considerations
- Confirm the material is safe to vacuum before loading
- Identify any hazardous or regulated waste — [confirm handling]
- Confirm disposal arrangements before work begins
Vacuum excavation reduces the risk of service strikes. It does not guarantee zero damage — accurate service plans and planning remain essential.
Equipment details
- Vacuum performance
- 4,162 m³/h (2,450 CFM) vacuum performance
- Water pressure
- 32 LPM at 3,600 PSI (248 Bar)
- Truck
- Hino FM2632 6x4 Platform
- Disposal
- [Confirm arrangements]
Service area
Vacuum loading is available across New England, North West NSW and the Upper Hunter. Mobilisation and disposal depend on the material and location — contact us to discuss your requirements.
Frequently asked questions
Need vacuum loading and material removal on your site?
Call 0418 790 274 or request a quote with your project details.
Planning excavation work around underground services?
Talk to a regional vacuum excavation specialist. We'll help you scope the work, confirm equipment suitability and arrange mobilisation.